EN
- Overview
- Related Products
1. Product Composition
Component |
Material & Spec |
Description |
Tap Main Body |
Solid Brass |
Integrated casting, polished chrome plating, high pressure & corrosion resistant |
Outer Flexible Spout |
Food-grade Silicone Tube |
Bendable, heat-resistant, adjustable any angle |
Outlet Spray Head |
Solid Brass |
Chrome finished, single steady stream aerator |
Mixing Cartridge |
Single lever ceramic mixing cartridge |
Synchronous control of water flow & temperature |
Inlet Hoses |
High-pressure resistant braided hoses |
Burst-proof for cold and hot water supply |
Single Control Lever |
Chrome-plated brass lever |
Right-side one-hand operation |
Sealing Parts |
Food-grade silicone gaskets & O-rings |
Full leak-proof sealing for all joints |
2.Colors available
Chrome, Brushed nickel, Gun mental, Matt black, Brushed brass, Golden,
3. Operation Guide
3.1 Open & Adjust Water
1.Lift the right lever upward to turn on water; higher lift = larger water output.
2.Tilt lever left for colder water, tilt right for hotter water; middle position delivers warm mixed water.
3.2 Adjust Spout Position
Bend the black silicone tube freely to point water flow at any sink area as needed.
4. Core Product Features
4.1Solid brass main body for stable pressure resistance and long service life.
4.2 Food-grade flexible silicone spout, bendable to any angle, covers all sink corners easily.
4.3 Ergonomic single lever one-hand control for flow and temperature adjustment.
4.4 Standard single-hole deck mount, fits most kitchen sink holes without extra drilling.
5. Product Applications
5.1 Household kitchen daily cleaning: Wash fruits, vegetables, tableware, large cookware and sink deep cleaning
5.2 Modern minimalist, light luxury kitchen renovation, apartments and new houses
6. Installation Notes
6.1 Pre-install: Close cold/hot main water valves and drain residual water inside pipelines.
6.2 Connect braided hoses to tap cold/hot inlets; tighten nuts moderately to avoid thread cracking and leakage.
6.3 Post-install test: Open water slowly, check all joints and silicone tube connection for dripping; test lever control and spout bending flexibility.
7. Usage Instructions
7.1 Bend the silicone tube gently; do not fold sharply for a long time to avoid tube deformation.
7.2 Gradually adjust hot water output to prevent scalding risk.
8. Troubleshooting & Analysis
Fault Phenomenon |
Root Cause |
Solution |
Weak water flow |
Supply valve not fully open, hose kinked, aerator clogged |
Open valves fully, straighten twisted hoses, rinse aerator mesh |
Tap drips after closing lever |
Worn ceramic mixing cartridge, damaged silicone inner seals |
Replace matched original cartridge or sealing O-rings |
Water leaks at silicone spout joint |
Loose connection, aged sealing ring between silicone tube and brass head |
Retighten the joint, replace damaged sealing gasket |
Water leaks at tap base |
Missing/aged rubber base gasket, loose fixing nut |
Install new intact gasket, evenly tighten base lock nut |
Silicone tube cannot stay bent |
Long-term sharp folding leads to fatigue deformation |
Restore tube to natural straight state for a period to recover elasticity |
9. Maintenance & Care
Daily cleaning: Wipe chrome body with soft microfiber cloth and mild neutral detergent; wipe silicone tube with damp cloth to remove oil stains. Never use steel wool or acidic cleaners which damage plating and silicone.
10. Suitable Target Users
10.1 Homeowners with modern minimalist kitchen decoration, need flexible multi-angle cleaning
10.2 Families with single/double-basin sinks, frequently cleaning large cookware
10.3 Rental property renovators seeking practical, easy-to-clean taps
10.4 Café, homestay and small light commercial kitchen operators
10.5 Users preferring flexible spout design for convenient sink washing
11. FAQ
Q1: What is the tap body and spout made of?
A1: The main body is solid brass; the bendable outer tube is food-grade silicone, and the outlet head is brass.
Q2: Can the silicone spout be bent freely to any direction?
A2: Yes, it supports arbitrary bending to adjust water outlet position for full sink coverage.
Q3: Is the silicone tube heat-resistant?
A3: Yes, it can withstand normal household hot water temperature without deformation or odour.
Q4: Do I need a professional plumber to install it?
A4: Simple DIY installation works with standard tools; consult a plumber for complex pipeline issues.
Q5: Can I replace the silicone spout if it gets damaged?
A5: Yes, the silicone tube and brass outlet head are detachable for separate replacement.
