Pull-Out Kitchen Tap/ sink mixer/pull out mixer

1. Product Composition

2. Colors available:

Chrome, Brushed nickel, Gun mental, Matt black, Brushed brass, Golden,

3. Operation Guide

3.1 Basic Cold & Hot Water Control (Right Single Lever Handle)

Turn On: Push the handle horizontally. First push activates cold water; further push delivers mixed warm water; full push turns on hot water.

Turn Off: Push the handle back to its original position to shut off water flow.

3.2 Pull-Out Spray Head Operation

Grip the spray head and pull it outward freely; the 150cm nylon hose extends to reach all sink corners.

Toggle the small switch on the spray head to switch between two water modes.

Release the spray head gently, the built-in counterweight pulls the hose and spray head back to the original spout position automatically.

4. Key Product Features

4.1 Cold Start Cartridge Starts normally under low water pressure, smooth operation, zero dripping after shut-off, effectively extends tap service lifespan.

4.2 150cm Flexible Nylon Pull-Out Hose Extra-long retractable hose covers full sink range, flexible, abrasion-resistant and no kinking during daily pull-back movements.

4.3 Dual-Function Spray Head Two adjustable water patterns to match different cleaning tasks: soft stream for fragile fruits/tableware, high-pressure spray for stubborn food residue.

4.4 360° Rotatable High-Arc Spout Large clearance under the spout for big pots, pans and baking trays; full rotation fits double sink layouts easily.

Single right lever design: Simple one-hand control of temperature and flow, ergonomic for daily kitchen use.

5. Product Applications

5.1 Household kitchen daily use: Washing vegetables, fruits, dishes, pots, pans and sink deep cleaning.

5.2 Renovated kitchen spaces: Fits standard single-hole sink mounting, ideal for new build and retrofit projects.

5.3 Light commercial settings: Café back kitchens, small restaurant prep areas, apartment complex pantries.

5.4 Large double-basin sinks: The extended pull-out spray head easily reaches both sink basins without moving cookware.

6. Installation Notes

6.1 Pre-install preparation

Close main cold/hot water stop valves and drain residual water inside pipelines.

Confirm your sink has a standard single mounting hole; no extra drilling required.

Check braided hoses, nylon pull-out hose and all sealing gaskets for complete accessories before assembly.

6.2 Step-by-step installation rules

Thread braided hoses onto tap inlet ports; tighten nuts moderately—over-tightening cracks threads and causes leakage.

Feed the 150cm nylon pull-out hose through the stainless steel spout carefully, avoid sharp bending or twisting the hose.

Fit rubber mounting gasket between tap base and sink surface, fasten the bottom lock nut securely to stop tap wobble.

Attach the counterweight clip to the nylon pull-out hose at the recommended position for stable automatic retraction.

6.3 Post-install testing

Open cold/hot water supply slowly, inspect all pipe joints, base and spray head for water leaks.

7. Daily Usage Instructions

7.1 Normal fixed spout water use: Operate the right handle only, spray head stays locked inside the spout.

7.2 Pull-out cleaning mode: Pull spray head out only when water is turned on gently; do not yank the hose forcefully.

7.3 Mode switch: Toggle the spray head tab lightly to swap stream/spray modes, do not apply excessive force to the switch tab.

7.4 Safety tips: Do not leave the spray head hanging pulled out for long hours; always let it retract back after use to reduce hose fatigue. Avoid boiling hot water continuous long-time flushing to protect nylon hose lifespan.

8. Troubleshooting & Analysis

9. Maintenance & Care

Regular surface cleaning Wipe chrome metal surfaces with soft microfiber cloth and mild neutral detergent. Never use steel wool, bleach, acidic or abrasive cleaners which scratch plating and corrode stainless steel.

10. Target User Groups

10.1 Family home owners: Practical pull-out function makes kitchen cleaning far more efficient, durable stainless steel & brass build fits busy household life.

10.2 Kitchen renovators: Standard single-hole fit, premium WRAS certified fittings meet UK/EU residential plumbing codes.

10.3 Small catering & café operators: Heavy-duty build withstands frequent daily commercial use, easy to clean and maintain.

10.4 People with double-basin sinks: Extra-long 150cm pull-out hose covers both sink basins effortlessly.

11. FAQ

Q1: Does this tap work with low household water pressure?

A1: Yes, equipped with professional cold start ceramic cartridge, it can start and run stably under low inlet water pressure without weak sputtering flow.

Q2: How long is the pull-out nylon hose exactly?

A2: The pull-out hose is 150cm in standard length, offering ample reach across full sink space.

Q3: Is the curved spout stainless steel or brass?

A3: The high-arc spout is made of 304 stainless steel, while the main body base is solid brass for maximum structural stability.

Q4: Are the inlet hoses certified for drinking water?

A4: All supply braided hoses carry WRAS approval, complying with UK potable water safety regulations.

Q5: Can I replace the pull-out hose myself if it wears out later?

A5: Yes, standard size compatible replacement nylon hoses are available; follow installation guide to swap the hose without professional plumbers.

Q6: Will the spray head retract back automatically every time?

A6: Normally yes, the hidden counterweight system provides steady retraction force. If retraction slows, simply reposition the counterweight clip on the hose.

Q7: Can I use descaling products on the tap?

A7: Only mild, non-acidic food-safe descaler is allowed; strong acid cleaners will damage chrome plating, stainless steel surface and silicone sealing parts.