EN
- Overview
- Related Products
1. Product Composition
Component |
Material & Spec |
Info |
Tap Main Body & Spout |
Solid Brass body+S.S.304 spout |
One-piece casting, polished chrome plating |
Independent Cartridges |
2 separate cartridges |
One for cold water, one for hot water |
Inlet Hoses |
High-pressure resistant braided hoses |
Burst-proof, stable water supply |
Cross Handles |
Brass chrome finish |
Separate control knobs for cold & hot |
2.Colors available
Chrome, Brushed nickel, Gun mental, Matt black, Brushed brass, Golden,
3. Operation Guide
3.1 Turn on & adjust
Left knob: Counter-clockwise = open cold water; wider twist = larger cold flow.
Right knob: Counter-clockwise = open hot water; wider twist = larger hot flow.
Mix two knobs to get ideal warm water temperature and total flow rate.
3.2 Turn off
Twist both knobs fully clockwise until tight to shut off cold and hot water completely.
4. Key Features
4.1 Dual independent cartridges: Cold and hot water circuits separated, stable temperature control,
4.2 360° swivel long spout arm: fits single/double sinks perfectly.
4.3 Classic retro cross-handle vintage design, polished chrome glossy surface, easy to wipe clean.
4.3 High-pressure braided supply hoses.
5. Applications
5.1 Household kitchen washing: Fruits, veggies, tableware, cookware and sink cleaning
5.2 Retro-style house renovation, villas, European & farmhouse decor kitchens
5.3 Light commercial use: Café back kitchens, homestays, small restaurant prep areas
5.4 Laundry room utility sinks
6. Installation Notes
6.1 Shut off main cold/hot water valves, drain residual pipe water before fitting.
6.2 Connect braided hoses to tap cold/hot inlets; tighten nuts moderately to avoid thread crack leakage.
6.3 Post-install test: Open water slowly, check all joints, base and spout for leaks; test spout rotation and handle control function.
7. Usage Instructions
7.1 Adjust two cross knobs gradually to fine-tune water temperature, avoid sudden full hot water to prevent scalding.
7.2 Do not twist handles with excessive brute force to protect ceramic cartridges.
8. Troubleshooting
Fault |
Cause |
Solution |
Low water flow |
Hose kinked, aerator clogged, valve not fully open |
Straighten hoses, rinse aerator mesh, fully open supply valves |
Tap drips after closing |
Worn single ceramic cartridge |
Replace the faulty independent cartridge |
Joint/base water leakage |
Loose nuts, aged silicone washers |
Retighten fittings, swap new sealing gaskets |
Spout stiff to rotate |
Limescale build-up at swivel joint |
Clean joint, apply tiny food-grade silicone lubricant |
Temperature unstable |
Uneven home cold/hot water pressure |
Adjust household water supply pressure balance |
9. Maintenance & Care
9.1 Daily cleaning: Wipe chrome surface with soft cloth + mild neutral detergent; never use steel wool or acidic harsh cleaners.
9.2 Long idle period: Close main water valves, drain all residual water inside tap and hoses to avoid freeze damage or stagnant odour.
10. Suitable Users
10.1 Homeowners with retro/European/farmhouse kitchen renovation styles
10.2 Elderly users familiar with traditional twin-knob tap operation
10.3 Double-sink kitchen owners needing wide swivel cleaning coverage
10.4 Buyers prioritizing solid brass durable construction
11. FAQ
Q1: Is professional plumber installation mandatory?
A1: Basic DIY installation is possible with standard tools; complex pipeline issues can ask for a plumber’s help.
Q2: Can I replace cold and hot cartridges separately?
A2: Yes, two fully independent cartridges; you only need to change the damaged one instead of both.
Q3: Does the spout rotate 360 degrees?
A3: Yes, the whole vertical pillar and spout arm swivel freely 360° horizontally.
Q4: What hoses come with the tap?
A4: Equipped with high-pressure burst-resistant braided inlet hoses for cold and hot water.
