EN
- Overview
- Related Products
- Left lever (Hot): Lift lever upward to open hot water; higher lift = larger hot water flow.
- Right lever (Cold): Lift lever upward to open cold water; higher lift = larger cold water flow.
- Adjust two levers proportionally to match your preferred warm water temperature and flow strength.
1. Product Composition
Component |
Material & Spec |
Description |
Tap Main Body Base |
Solid Brass |
Integrated casting, polished chrome plating, pressure & corrosion resistant |
Curved Spout |
Solid Brass |
Rust-proof, fixed non-rotatable high arc spout |
Control Cartridges |
2 Independent Ceramic Cartridges |
Left for hot water, Right for cold water, fully separated water circuits |
Inlet Hoses |
High-pressure resistant braided hoses |
Burst-proof for cold & hot water supply |
Dual Control Levers |
Chrome-plated brass handles |
Red mark = hot water, blue mark = cold water |
Aerator |
ABS + stainless steel filter mesh |
Soft splash-free aerated water flow |
Sealing Parts |
Food-grade silicone gaskets & O-rings |
Full leak-proof sealing for all joints |
2.Colors available
Chrome, Brushed nickel, Gun mental, Matt black, Brushed brass, Golden,
3. Operation Guide
3.1 Turn On & Adjust Water
3.2 Turn Off
Push both levers fully down to the lowest position to completely cut off cold and hot water supply.
4. Core Product Features
4.1 Composite premium material: Solid brass main base for stable pressure resistance, 304 stainless steel spout for anti-rust and long service life.
4.2 Split independent cold/hot cartridges, single faulty cartridge can be replaced separately without changing both.
4.3 Standard two-hole deck-mounted design, widely compatible with most double-hole sink countertops.
5. Product Applications
5.1 Household kitchen daily cleaning: Wash fruits, vegetables, tableware, cookware and sink surfaces
5.2 Budget apartments, rental housing, simple style kitchen renovation
5.3 Light commercial scenarios: Staff pantries, small homestay prep areas, laundry utility sinks
5.4 Old house renovation replacing traditional two-hole twin taps
6. Installation Notes
6.1 Pre-install: Close cold/hot main water stop valves and drain residual water inside pipelines.
6.2 Connect braided hoses to tap cold/hot inlets; tighten nuts moderately to avoid thread cracking and leakage.
6.3 Post-install test: Slowly open water supply, inspect all hose joints and tap base for dripping; test two levers’ opening/closing function smoothly.
7. Usage Instructions
7.1 If water flow weakens, detach and clean the aerator filter mesh to clear limescale blockage.
7.2 Avoid heavy hard cookware hitting the tap surface to prevent scratches and dents on chrome plating.
8. Troubleshooting & Analysis
Fault Phenomenon |
Root Cause |
Solution |
Weak water flow |
Supply valve not fully open, hose kinked, aerator clogged |
Open valves fully, straighten twisted hoses, rinse aerator filter mesh |
Single side drips after closing lever |
Worn independent ceramic cartridge of that channel |
Replace the faulty single cartridge separately |
Water leaks at tap base |
Aged/missing rubber base gasket, loose fixing nut |
Install new intact gasket, evenly tighten base lock nut |
Leakage at hose connection ends |
Loose threaded nuts, damaged hose sealing washers |
Retighten hose nuts, swap defective sealing washers |
Obvious water temperature fluctuation |
Unbalanced household cold/hot water pressure |
Adjust home water supply pressure balance |
9. Maintenance & Care
Daily cleaning: Wipe chrome surface with soft microfiber cloth and mild neutral detergent only. Never use steel wool, bleach or acidic descaling cleaners which scratch plating and corrode metal.
10. Suitable Target Users
10.1 Owners of standard two-hole kitchen sinks, old house renovation customers
10.2 Elderly users accustomed to traditional dual-lever tap operation
10.3 Rental property renovators seeking cost-effective durable taps
11. FAQ
Q1: What materials are the spout and main body?
A1: The curved spout is made of 304 stainless steel, the whole base main body is solid brass.
Q2: Can cold and hot cartridges be replaced individually?
A2: Yes, two fully separated cartridges; you only need to replace the broken one instead of both.
Q3: Does the spout swivel left and right?
A3: No, this is fixed deck-mounted type with non-rotatable spout.
Q4: What accessories are equipped for water connection?
A4: Matched high-pressure burst-resistant braided inlet hoses for cold and hot water. Q5: Do I need a professional plumber to install it?
A5: Simple DIY installation works with basic tools; consult a plumber for complex pipeline issues.
