EN
- Overview
- Related Products
1. Product Composition
Component |
Material & Spec |
Details |
Tap Main Body & Curved Spout |
Food Grade 304 Stainless Steel |
Brushed anti-fingerprint finish, rust & corrosion resistant |
Inner Retractable Hose |
Flexible Nylon Hose |
Wear-resistant, stretchable for pull-down spray head |
Inlet Connection Hoses |
High-pressure Burst-proof Braided Hoses |
Stable cold & hot water supply connection |
Mixing Cartridge |
Single lever ceramic mixing cartridge |
Synchronous flow & temperature adjustment |
Spray Head |
304 Stainless Steel with mode switch |
3 water outlet functions |
Sealing Fittings |
Food-grade silicone gaskets & O-rings |
Full leak-proof sealing for all joints |
2. Colors available:
Chrome, Brushed nickel, Gun mental, Matt black, Brushed brass, Golden,
3. Operation Guide
3.1 Water Opening & Temperature Adjustment
Lift the right side lever upward to turn on water; higher lifting height equals larger water output.
Tilt the lever left for colder water, tilt right for hotter water; middle position outputs warm mixed water.
3.2 3-Spray Mode Switch
Press the button on the spray head to cycle 3 modes:
Soft aerated stream (for washing fruits & tableware)
Powerful spray (for heavy stain cleaning)
Pause flat water mode (for quick water transfer without splashing)
3.3 Shut Off Water
Push the lever fully down to cut off water; release the spray head and it retracts back into the spout automatically.
4. Core Product Features
4.1 Full 304 stainless steel structure (body + spout), matte brushed surface resists fingerprints, durable for humid kitchen environments.
4.1 3-function spray head covers all kitchen cleaning needs, one-click easy mode switching.
4.2 Flexible nylon pull hose, strong resilience, long service life after repeated pulling.
4.3 High-pressure anti-burst braided inlet hoses, compatible with most household water pressure ranges.
4.4 Ergonomic single lever one-hand operation to adjust temperature and flow simultaneously.
4.5 360° rotatable spout arm, fits single and double basin sinks perfectly.
4.6 Standard single-hole deck mounting, simple installation for most kitchen sinks.
5. Product Applications
5.1 Household daily kitchen work: Washing vegetables, fruits, cookware, deep sink stain cleaning
5.2 Modern minimalist renovated kitchens, apartments, villa open kitchens
6. Installation Notes
6.1 Pre-install: Close cold/hot main water stop valves, drain residual water inside pipelines.
6.2 Connect braided hoses to tap cold/hot inlets; tighten nuts moderately to avoid thread cracking and leakage.
6.3 Thread the nylon pull hose gently through the stainless steel spout, prevent sharp bending or pinching the hose.
6.4 Fit rubber sealing gasket between tap base and sink countertop, fasten bottom lock nut tightly to eliminate tap wobble.
6.5 Post-install test: Slowly open water supply, check all joints, base and spray head for leaks; test lever control, three spray modes and automatic retraction performance.
7. Usage Instructions
7.1 Pull the spray head gently with steady force; do not yank the nylon hose violently to prevent internal damage.
7.2 Tap the spray head switch lightly; do not apply brute force to the mode button.
7.3 Avoid long-term continuous maximum hot water output to extend nylon hose service life.
7.4 Always let the spray head retract fully into the spout after use to reduce hose fatigue.
8. Troubleshooting & Analysis
Fault Phenomenon |
Root Cause |
Solution |
Weak water flow |
Supply valve not fully open, hose kinked, spray head filter clogged |
Fully open stop valves, straighten twisted hoses, rinse spray head mesh |
Tap drips after lever closed |
Worn mixing ceramic cartridge, damaged silicone inner seals |
Replace matching original cartridge or sealing O-rings |
Spray head cannot retract automatically |
Nylon hose tangled inside spout cavity |
Untangle and straighten the internal pull hose |
Base water leakage |
Aged/missing rubber base gasket, loose bottom fixing nut |
Install new intact gasket, evenly tighten base lock nut |
Unsmooth mode switching |
Limescale buildup inside spray head mechanism |
Soak spray head in mild neutral descaler, rinse thoroughly |
9. Maintenance & Care
9.1 Daily cleaning: Wipe stainless steel surface with soft microfiber cloth and mild neutral detergent. Never use steel wool, bleach or acidic cleaners which scratch the brushed finish.
9.2 Routine inspection every 3–6 months: Clean spray head filter mesh; check braided inlet hoses and nylon pull hose for aging/cracking; lubricate lever pivot with tiny food-grade silicone lubricant for smooth movement.
9.3 Long idle storage: Shut off main cold/hot water valves, open the lever fully to drain residual water inside tap and hoses, avoid freeze cracking or stagnant water odour.
10. Suitable Target Users
10.1 Homeowners pursuing modern minimalist kitchen decoration, preferring stainless steel fixtures
10.2 Families with large pots, pans or double-basin kitchen sinks
10.3 Rental property renovators, cost-effective durable fixture buyers
10.4 Café, homestay and small light commercial kitchen operators
10.5 Users needing multi-mode spray for versatile kitchen cleaning
11. FAQ
Q1: Are the tap body and spout made of stainless steel?
A1: Yes, both main body and curved spout adopt food-grade 304 stainless steel.
Q2: How many water modes does the spray head have?
A2: Three adjustable water modes: aerated stream, powerful spray and pause mode.
Q3: What material is the inner retractable pull hose?
A3: High wear-resistant flexible nylon hose with excellent stretch recovery.
Q4: Are the inlet connecting hoses pressure-resistant?
A4: Yes, matched with high-pressure burst-proof braided water supply hoses.
Q5: Can I replace the nylon pull hose by myself if it wears out?
A5: Yes, standard size compatible nylon replacement hoses support simple DIY installation.
