EN
- Overview
- Related Products
1. Product Composition
Component |
Material & Spec |
Description |
Tap Main Body |
Solid H59 Brass |
Integral casting, polished chrome plating, pressure and corrosion resistant |
Curved Spout |
Food Grade 304 Stainless Steel |
Rust-proof, built-in cavity for pull-out hose storage |
Control Cartridge |
Single independent cold water ceramic cartridge |
Separately controls cold water flow only |
Inlet Connection Hose |
High-pressure burst-proof braided hose |
Dedicated for cold water supply |
Cross Handle |
Chrome brass cross knob |
Manual switch for cold water on/off and flow adjustment |
2.Colors available
Chrome, Brushed nickel, Gun mental, Matt black, Brushed brass, Golden,
3. Operation Guide
3.1 Turn On & Adjust Cold Water Flow
Twist the cross handle counter-clockwise to open cold water; wider rotation brings larger water flow.
3.2 Shut Off Water Supply
Twist the cross handle fully clockwise until tight to completely cut off cold water.
4. Core Product Features
4.1 Dual premium material structure: Solid brass main body for stable pressure resistance, 304 stainless steel spout for long-term anti-rust performance.
4.2 Single cold water design, perfect for spaces without hot water piping.
4.3 Classic vintage cross knob handle, intuitive operation suitable for elderly users.
4.4 Standard single-hole deck-mounted design, supports simple DIY installation.
5. Product Applications
5.1 Household cold-water-only kitchen sinks: Washing fruits, vegetables, tableware and sink deep cleaning
5.2 Balcony laundry basins, garage utility sinks, outdoor washing stations
5.3 Rental apartments, old house renovations without hot water pipelines
5.4 Small homestay prep zones, staff pantries and light commercial cold water sinks
6. Installation Notes
6.1 Pre-install preparation: Close the cold water main stop valve and drain residual water inside pipelines.
6.2 Connect the braided hose to the tap cold water inlet; tighten threaded nuts moderately to avoid thread cracking and leakage.
6.3 Post-install inspection test: Open cold water slowly, check all joints, base and spray head for dripping; test handle adjustment and automatic retraction of spray head.
7. Daily Usage Instructions
Do not twist the cross handle with excessive brute force to protect the ceramic cartridge from wear.
8. Troubleshooting & Analysis
Fault Phenomenon |
Root Cause |
Solution |
Weak cold water output |
Supply valve not fully open, hose twisted, spray head mesh clogged |
Fully open stop valve, straighten twisted hose, rinse spray head filter mesh |
Tap drips after closing handle |
Worn cold water ceramic cartridge, damaged silicone sealing rings |
Replace the matching original single cold cartridge or defective O-rings |
Spray head cannot retract automatically |
Inner hose tangled inside spout cavity |
Untangle and straighten the internal retractable hose |
Water leaks at tap base |
Aged/missing rubber base gasket, loose bottom fixing nut |
Install new intact sealing gasket, evenly tighten base lock nut |
Water leakage at hose connection ends |
Loose threaded nuts, damaged hose sealing washers |
Retighten hose nuts, replace defective sealing washers |
9. Maintenance & Care
Daily cleaning: Wipe chrome metal surface with soft microfiber cloth and mild neutral detergent. Never use steel wool, bleach or acidic descaling cleaners which scratch chrome plating and corrode metal.
10. Suitable Target User Groups
10.1 Homeowners with cold-water-only kitchen or laundry sinks
10.2 Old house renovators and rental property operators without hot water pipelines
10.3 Users who prefer classic retro cross-knob tap styling
10.4 Garage, homestay and small light commercial sink operators
11. FAQ
Q1: What materials are the tap body and curved spout made of?
A1: The main body is solid brass, and the curved spout is made of 304 stainless steel.
Q2: Can this tap connect hot water supply?
A2: No, it is a single cold water tap with only one cold water pipeline, not compatible with hot water.
Q3: Is the spray head pull-out design for sink cleaning?
A3: Yes, the spray head can be pulled out freely to clean all sink corners and large cookware.
Q4: Can I replace the inner retractable hose by myself if it wears out? A4: Yes, it adopts standard universal thread size, supporting simple DIY replacement.
Q5: Does the spout support horizontal rotation?
A5: This model has a fixed spout without horizontal rotation function.
