EN
- Overview
- Related Products
1. Product Composition
Component |
Material & Spec |
Description |
Tap Main Body |
Solid Brass |
One-piece casting, chrome polished, high pressure & corrosion resistant |
Curved Spout |
304 Stainless Steel |
Rust-proof, 360° horizontal rotatable high arc design |
Mixing Cartridge |
Single lever ceramic mixer cartridge |
Adjusts water flow and temperature simultaneously |
Inlet Hoses |
High-pressure resistant braided hoses |
Burst-proof for cold & hot water supply |
Operating Handle |
Chrome plated brass lever |
Single right-side control handle |
Aerator |
ABS + stainless steel filter mesh |
Creates soft splash-free water flow |
Sealing Parts |
Food-grade silicone gaskets & O-rings |
Full leak-proof sealing for all joints |
2.Colors available
Chrome, Brushed nickel, Gun mental, Matt black, Brushed brass, Golden,
3. Operation Guide
3.1 Turn on & Adjust Water
Lift the right lever upward to turn on water; higher lift = larger water output.
Tilt lever left for colder water, tilt right for hotter water; middle position delivers warm mixed water.
3.2 Turn off Water
Push the lever fully down to the lowest position to completely shut off water supply.
4. Key Features
4.1 Dual premium material structure: Solid brass body for stable pressure resistance, 304 stainless steel spout for anti-rust performance.
4.2 360° rotatable high-arc spout, enough clearance for large pots and pans.
4.3 Ergonomic single lever, one-hand control of flow and temperature.
4.4 Standard single-hole deck mount, fits most standard kitchen sink holes without extra drilling.
5. Product Applications
5.1 Household daily kitchen use: Washing fruits, vegetables, tableware, cookware and sink cleaning
5.2 Modern minimalist kitchen renovation, apartments and new houses
5.3 Light commercial scenes: Café prep areas, office pantries, homestay kitchens
5.4 Rental houses and budget family kitchens
6. Installation Notes
6.1 Pre-install: Shut off cold/hot main water valves and drain residual water inside pipelines.
6.2 Connect braided hoses to tap cold/hot inlets; tighten nuts moderately to avoid thread cracking and leakage.
6.3 Place rubber sealing gasket between tap base and sink surface, fasten bottom lock nut tightly to prevent tap wobble.
6.4 Post-install test: Open water slowly, check all joints and base for leakage; test spout rotation and lever control smoothly.
7. Usage Instructions
7.1 Do not pull or twist the spout violently beyond its 360° rotation range.
7.2 Avoid long-time full water flow to reduce unnecessary cartridge wear.
7.3 If water flow becomes weak, remove and clean the aerator filter mesh to clear limescale blockages.
7.4 Prevent hard cookware from hitting the tap surface to avoid scratches and dents.
8. Troubleshooting & Analysis
Fault |
Cause |
Solution |
Weak water flow |
Supply valve not fully open, hose twisted, aerator clogged |
Fully open valves, straighten hoses, rinse aerator mesh |
Tap drips after closing lever |
Worn ceramic cartridge, damaged silicone inner seals |
Replace matched original cartridge or sealing O-rings |
Water leaks at tap base |
Aged/missing rubber base gasket, loose fixing nut |
Install new intact gasket, evenly tighten base lock nut |
Stiff spout rotation |
Limescale accumulated at spout joint |
Clean joint, apply tiny food-grade silicone lubricant |
Unstable water temperature |
Unbalanced household cold/hot water pressure |
Adjust home water supply pressure balance |
9. Maintenance & Care
9.1 Daily cleaning: Wipe chrome surface with soft microfiber cloth and mild neutral detergent. Never use steel wool, bleach or acidic cleaners which scratch plating and corrode metal.
9.2 Routine inspection every 3–6 months: Clean aerator filter mesh; check braided hoses for aging/cracking; lubricate lever pivot lightly.
10. Suitable User Groups
10.1 Homeowners with modern minimalist kitchen decoration
10.2 Families with single or double-basin kitchen sinks
10.3 Rental property renovators seeking cost-effective durable taps
10.4 Café, homestay and small light commercial kitchen operators
10.5 Buyers preferring brass body + 304 stainless steel spout combination
11. FAQ
Q1: What material is the spout and main body?
A1: The curved spout is made of 304 stainless steel, and the main body is solid brass.
Q2: Can the spout rotate left and right?
A2: Yes, the spout supports 360° horizontal rotation for flexible sink coverage.
Q3: Do I need a professional plumber to install it?
A3: Simple DIY installation is available with standard tools; consult a plumber for complex pipeline problems.
Q4: Why does the water not splash when washing?
A4: Equipped with an aerator to output soft aerated water flow and reduce splashing.
Q5: Can I replace the inlet braided hoses by myself?
A5: Yes, standard universal thread design supports easy self-replacement of hoses.
